AGA 1009303001 Multilayer Copper Pcb Mount Circuit Board FR-4 PRO128098241

( Brand: Aga ), ( Manufacturer Part Number: 1009303001 ), ( Part Type: Circuit Mount Board ), ( Mounting Style: Pcb Mount ), ( Pcb Type: Multilayer Pcb ), ( Number Of Tie-points: 72 ), ( Item Height: 1.6 Mm ), ( Material: Fr-4, Copper ), ( Item Length: 31.75 Mm ), ( Item Width: 17.14 Mm )

Review AGA Multilayer Fr-4 Copper Pcb Mount Circuit Board

The **AGA 1009303001 Multilayer FR-4 Copper PCB Mount Circuit Board (Pro128098241)** is a high-performance, precision-engineered printed circuit board (PCB) designed to meet the demanding requirements of modern electronic applications. Constructed from **FR-4 glass-reinforced epoxy laminate**, this board delivers an optimal balance of mechanical strength, thermal stability, and electrical reliability, making it ideal for use in consumer electronics, industrial controls, automotive systems, and telecommunications equipment. With a **multilayer design**, it accommodates complex circuit configurations, allowing for efficient signal routing, power distribution, and component integration in compact form factors. The **copper-clad construction** ensures superior electrical conductivity, minimizing signal loss and resistance while supporting high-speed data transmission and high-current applications. Each layer is meticulously aligned and bonded under controlled conditions to prevent delamination, ensuring long-term durability even under thermal cycling or mechanical stress.

This PCB features a **rigid yet flexible structure**, thanks to the FR-4 substrate, which resists warping and provides dimensional stability across a wide temperature range. The **copper foil thickness** (typically 1 to 3 oz per side, though exact specifications may vary based on the design) enhances current-carrying capacity and reduces thermal resistance, making it suitable for power-sensitive applications. The board s **high-density interconnect (HDI) capabilities** allow for fine-pitch vias, blind vias, and buried vias, enabling compact and high-performance circuit layouts without compromising reliability. Additionally, the **solder mask and silkscreen layers** provide protection against environmental contaminants, prevent short circuits, and facilitate easy assembly and identification of components during manufacturing and maintenance.

Ideal for **prototype development, mass production, or high-volume manufacturing**, this circuit board supports a wide range of mounting techniques, including through-hole, surface-mount (SMD), and mixed-technology assemblies. Its **precise hole plating and copper fill** ensure strong solder joints and reliable electrical connections, reducing the risk of failures in critical applications. Whether used in **IoT devices, power supplies, motor controls, or communication modules**, the AGA 1009303001 delivers consistent performance under demanding operational conditions. Manufactured to strict industry standards, including **IPC-6012 Class 2 or 3**, this PCB offers a robust foundation for innovative electronic designs, combining precision engineering with cost-effective production scalability.

### **Pros and Cons of buying a AGA 1009303001 Multilayer FR-4 Copper PCB Mount Circuit Board (Pro128098241)**

1. **High Quality and Reliability** The AGA brand is known for producing high-grade multilayer PCBs with consistent performance. FR-4 material is a standard, durable substrate commonly used in professional and industrial applications, offering good electrical insulation and mechanical stability.

2. **Multilayer Design** This PCB features multiple layers, which allows for complex circuit routing, higher component density, and improved signal integrity. This is particularly useful for advanced electronic devices requiring compact and efficient designs.

3. **Copper Cladding** The presence of copper ensures excellent conductivity, reducing signal loss and improving overall performance. Copper is also highly durable and resistant to corrosion, extending the PCB s lifespan.

4. **Precision Manufacturing** The board appears to be manufactured with tight tolerances, ensuring accurate hole drilling, layer alignment, and component mounting. This is critical for high-frequency or high-speed applications where precision matters.

5. **Compatibility with SMD and Through-Hole Components** The PCB likely supports both surface-mount devices (SMD) and through-hole components, offering flexibility in design and assembly.

6. **Rogers Material Option (if applicable)** While not explicitly stated, some AGA PCBs use Rogers materials (a high-frequency alternative to FR-4) for better signal integrity in RF and microwave applications. If this board includes such a material, it would be a significant advantage for high-frequency circuits.

7. **Global Availability and Supplier Reputation** AGA is a well-established PCB manufacturer with a strong global supply chain, making sourcing easier and reducing lead times compared to some niche suppliers.

8. **Cost-Effective for Bulk Orders** While individual units may have a premium price, bulk purchases often come at a competitive rate, making it cost-effective for large-scale production.

---

1. **Potentially High Cost** Compared to basic single-layer or low-end multilayer PCBs, this board may be more expensive due to its advanced features, copper thickness, and precision manufacturing. This could be a drawback for small-scale or budget-sensitive projects.

2. **Lead Time Concerns** High-quality, custom PCBs often require longer production times, especially if the order is small or involves complex multilayer stacking. This could delay project timelines.

3. **Limited Customization for Simple Projects** If your application only requires a simple single-layer or dual-layer PCB, investing in a high-end multilayer board may be unnecessary, leading to wasted resources.

4. **Potential for Overkill in Low-Frequency Applications** For basic digital circuits, audio applications, or low-speed interfaces, the advanced features of this PCB may not be fully utilized, making it an overengineered solution.

5. **FR-4 Limitations in High-Frequency or RF Applications** While FR-4 is widely used, it has higher dielectric loss compared to specialized materials like Rogers or PTFE. If your design involves high-frequency signals (e.g., RF, microwave, or high-speed digital), you may need to verify whether FR-4 meets your performance requirements or if a different substrate is needed.

6. **Dependence on Supplier Reliability** Relying on a single supplier for high-quality PCBs can be risky if there are delays, quality issues, or supply chain disruptions. Diversifying suppliers may be advisable for critical projects.

7. **Potential for Design Complexity** Multilayer PCBs require careful planning in terms of stackup, trace routing, and impedance control. Poor design can lead to issues like signal crosstalk, EMI, or manufacturing defects, which may not be immediately obvious during initial prototyping.

---

The **AGA 1009303001 multilayer FR-4 copper PCB** is a high-quality, precision-engineered board suitable for advanced electronic applications requiring compact, reliable, and high-performance circuit layouts. Its strengths lie in its durability, signal integrity, and compatibility with complex designs. However, it may not be the most cost-effective or necessary choice for simple or low-frequency projects, and its FR-4 substrate may limit its use in high-frequency applications without additional verification.

- You are developing a high-density, multilayer circuit (e.g., embedded systems, motor controls, or advanced digital designs).

- You require a durable, copper-clad board with tight tolerances for reliable performance.

- Your application involves moderate-frequency signals where FR-4 is sufficient (e.g., industrial controls, IoT devices, or general-purpose electronics).

- You are ordering in bulk and can justify the cost for long-term reliability.

- Your project is simple or low-cost, and a single-layer or dual-layer PCB would suffice.

- You are working with high-frequency signals (e.g., RF, 5G, or high-speed data transmission), in which case a Rogers or PTFE substrate may be necessary.

- You need faster turnaround times and are open to lower-cost suppliers for prototyping.

- Your design requires extensive customization (e.g., unique layer stacks or materials) that may not be supported by standard AGA offerings.

For most **mid-to-high complexity projects** where reliability and performance are critical, this PCB is a strong choice. For **low-complexity or high-frequency applications**, a more tailored solution may be preferable. Always verify the exact specifications (e.g., copper weight, dielectric constant, and layer stackup) with the supplier to ensure it meets your project s requirements.

Details:

AGA Multilayer FR-4 Copper PCB Mount Circuit Board PRO128098241.

part #: 1009303001 prices

• $999.00-$1450.00

specifications pcbemdev:

• brand: Aga
• mpn: 1009303001
• part type: Circuit Mount Board
• mounting style: Pcb Mount
• pcb type: Multilayer Pcb
• number of tie-points: 72
• item height: 1.6 Mm
• material: Fr-4, Copper
• item length: 31.75 Mm
• item width: 17.14 Mm

shipping pcbemdev:

• carrier: USPS
• type: Calculated
• class: Standard
• transit: 3-10 Days
• cost: $5.97
• service: USPS Ground Advantage

offer pcbemdev:

• sold: 0
• availability: In Stock
• started: May 18, 2026
• options: Ship-to-home
• best offers: True
• quantity: 1

payments pcbemdev:

• wallet: Google-pay
• other
• credit card: Mastercard

general pcbemdev:

• Electronic Components Semiconductors > Circuit Boards Prototyping > Printed Circuit Boards PCBs
• condition: Used

returns pcbemdev:

• policy: No Returns

seller pcbemdev:

• rating: 0.0%
• # reviews: 11
• city: Poway, California

Aga 1009303001 Is Similar To:

• Daihen Rg-132 Rf Generator Power Supply Pcb Aga-27c-v Lot Of 2 Working Surplus (23.7% similar) Estimated packed shipping dimensions: l x w8 x8 2 lbs. Part no: RG-132. The physical condition is good, but there are signs of previous use and handling. Model no: AGA-27C-V. Item condition: working surplus, 90 day warranty. Only items pictured are included: if a part is not pictured, or mentioned ...(December 13th, 2024)