BARCO Medical Display Signal Pcb Circuit Board K750534-02
( Brand: Barco ), ( Manufacturer Part Number: 13EK580158307 ), ( Part Type: Display Circuit Signal Board )
Review BARCO Medical Display Main Signal Pcb Circuit Board 13e K5801583
The **Barco 13EK580158307 Medical Display Signal PCB Circuit Board (Model 13E-K5801583-07, Part Number K750534-02)** is a high-performance, precision-engineered printed circuit board (PCB) designed specifically for Barco s advanced medical display systems, including high-end diagnostic imaging solutions such as ultrasound, fluoroscopy, and interventional radiology monitors. This critical component serves as the backbone of the display s signal processing, ensuring seamless integration between the imaging source, signal conditioning circuitry, and the final visual output. Engineered with rigorous attention to medical-grade standards, the PCB incorporates a robust multi-layered design optimized for minimal signal degradation, high-resolution image fidelity, and reliable operation in demanding clinical environments.
At its core, the **13EK580158307** features a sophisticated analog-to-digital conversion (ADC) subsystem, capable of handling high-bandwidth video signals with exceptional dynamic range and low noise performance. The circuit board employs high-speed differential signaling pathways, often utilizing LVDS (Low Voltage Differential Signaling) or similar high-performance interfaces, to transmit pixel data with precision while mitigating electromagnetic interference (EMI) and signal crosstalk a critical requirement for maintaining clarity in real-time medical imaging. Additionally, the PCB integrates dedicated signal conditioning circuits, including adaptive gamma correction, contrast enhancement, and color space conversion modules, ensuring that the displayed images adhere to strict medical imaging standards such as DICOM (Digital Imaging and Communications in Medicine) compliance.
For enhanced reliability in clinical settings, the **K750534-02** PCB incorporates redundant power management and fail-safe mechanisms, including voltage regulators with built-in protection against surges, transients, and thermal overloads. The use of high-grade, medical-grade components such as low-leakage capacitors, precision resistors, and temperature-stable passive elements ensures long-term stability and consistency, even under prolonged use or in environments with fluctuating power conditions. Furthermore, the board s layout adheres to strict thermal management principles, with strategic placement of heat sinks or thermal vias to dissipate heat efficiently, preventing degradation of signal integrity or component lifespan.
The **13EK580158307** is also equipped with advanced diagnostic and calibration features, allowing for real-time monitoring of signal integrity and automatic adjustments to compensate for drift or environmental factors. This includes embedded firmware or programmable logic that can fine-tune display parameters such as brightness, sharpness, and color accuracy, ensuring that clinicians receive accurate and diagnostically useful images. The PCB s modular design further facilitates easy servicing and upgrades, as individual signal processing modules or connectors can be replaced without compromising the overall functionality of the display system.
In summary, the **Barco 13EK580158307 Medical Display Signal PCB Circuit Board (K750534-02)** represents a pinnacle of engineering precision, combining cutting-edge signal processing, medical-grade reliability, and adaptability to deliver uncompromising image quality in critical diagnostic and interventional applications. Whether integrated into a high-end ultrasound system, a fluoroscopy suite, or a surgical navigation platform, this PCB ensures that medical professionals have access to the highest fidelity visual data, enabling confident and accurate decision-making in patient care.
### **Pros and Cons of buying a Barco 13EK580158307 Medical Display PCB Circuit Board (13E K5801583-07 K750534-02)**
#### **Pros**
1. **Compatibility with Barco Medical Displays** This PCB is designed specifically for Barco s 13EK series medical displays, ensuring seamless integration without compatibility issues. It is a genuine or authorized replacement part, which reduces the risk of functionality problems.
2. **High Reliability and Durability** Barco is a well-known manufacturer in medical imaging and display technology, known for producing high-quality, long-lasting components. The PCB is built to withstand the demands of clinical environments, including consistent power cycles and exposure to medical-grade environments.
3. **Warranty and Support** If purchased from an authorized Barco distributor or dealer, this part may come with a warranty or support options. This provides peace of mind in case of defects or failures shortly after installation.
4. **Performance Optimization** The PCB is engineered to maintain the display s original performance, including color accuracy, contrast, and signal processing. This ensures that the medical display continues to function as intended for diagnostic and procedural purposes.
5. **Easier Troubleshooting** Since this is an OEM or authorized replacement, it reduces the likelihood of compatibility issues that can arise with aftermarket or generic parts. This simplifies diagnostics and repair processes.
6. **Future-Proofing** Barco s medical displays are widely used in hospitals and clinics, meaning this part may remain in demand for years. Owning the correct PCB ensures that the display remains functional and repairable even as older systems are phased out.
7. **Reduced Downtime** If the original PCB fails, replacing it with this authorized part minimizes downtime for the medical facility, which is critical in healthcare settings where uninterrupted operation is essential.
---
#### **Cons**
1. **High Cost** Barco parts, especially OEM or authorized replacements, are typically more expensive than generic or aftermarket alternatives. The cost may be a significant investment, especially for smaller clinics or budget-conscious facilities.
2. **Limited Availability** Depending on the supplier, this part may not be readily available from all distributors. Some sellers may require special ordering, leading to delays in receiving the part.
3. **Potential for Counterfeit Parts** If purchased from unauthorized or third-party sellers (especially online marketplaces), there is a risk of receiving counterfeit or refurbished parts that may not function as intended. This can lead to further damage or safety concerns.
4. **Technical Expertise Required** Replacing a PCB in a medical display often requires technical knowledge and careful handling to avoid damaging other components. Facilities without in-house IT or medical equipment technicians may need to hire a specialist, adding to the cost.
5. **Depreciation** Medical equipment, including displays, depreciates over time. If the display is older, the cost of replacing the PCB may not be justified compared to upgrading to a newer model with built-in redundancy or self-diagnostic features.
6. **Warranty Void Risk** If the display is still under manufacturer warranty, attempting to replace the PCB with an aftermarket or unauthorized part may void the warranty. This could leave the facility without coverage if other issues arise.
7. **Environmental and Regulatory Considerations** Medical equipment must comply with strict regulatory standards (e.g., FDA, CE, or IEC). While Barco parts are certified, improper disposal of old PCBs or improper handling during replacement could pose environmental or compliance risks.
---
### **Conclusion**
The Barco 13EK580158307 PCB circuit board is a high-quality, reliable replacement part for its intended medical display model. It offers the advantage of maintaining the display s original performance, compatibility, and support from Barco s reputation. However, the high cost, potential availability issues, and the need for technical expertise to install it are significant drawbacks.
For facilities with older Barco displays experiencing PCB failure and the budget to invest in an authorized replacement, this part is a strong choice. However, if the display is outdated or the facility is operating on a tight budget, weighing the cost against the potential benefits of upgrading to newer equipment may be more prudent.
---
### **Recommendation**
1. **Verify the Source** Purchase the part exclusively from an **authorized Barco distributor, medical equipment dealer, or the manufacturer s official website** to avoid counterfeit or substandard parts. Avoid generic sellers unless they provide certification of authenticity.
2. **Check Warranty and Support** Ensure the part comes with a warranty or return policy. If the display is still under warranty, consult Barco s support team before proceeding to avoid voiding coverage.
3. **Assess Cost vs. Benefit** Calculate the total cost of repair (including labor if outsourced) against the potential savings from keeping the display operational versus upgrading. For critical systems, the investment may be justified.
4. **Consider Professional Installation** If the facility lacks in-house expertise, hire a certified medical equipment technician to replace the PCB. This reduces the risk of further damage and ensures proper calibration.
5. **Explore Alternative Solutions** If the display is nearing end-of-life, evaluate whether upgrading to a newer Barco model with built-in redundancy or easier maintenance features would be more cost-effective in the long run.
6. **Document the Repair** Keep records of the replacement, including part numbers, installation dates, and any warranty details. This helps with future troubleshooting and compliance audits.
For most healthcare facilities where the display is mission-critical and still in serviceable condition, the **Barco 13EK580158307 PCB is the recommended choice** due to its reliability and compatibility. However, facilities should carefully weigh the financial and operational implications before proceeding.
Details:
Comes as pictured. We acquired the unit in a state surplus sale. 1841 W Carriage House Dr, Baton Rouge, LA 70815. Regardless of the origin equipment, documentation provided or identification appearing upon equipment described and offered here is in no way certified for, recommended for any specific use.
No other accessories. Shipping Handling. Please see the pictures for cosmetic condition and components it comes with. Inventory ID: WH2-Z2-Black Rack Board Box 10, 020326, BAE.
part #: 13ek580158307 price
- $452.24
specifications pcbemdev:
- brand: Barco
- mpn: 13ek580158307
- part type: Display Circuit Signal Board
shipping pcbemdev:
- transit: 3-8 Days
- cost: $25.00
- type: Fixed
- class: Standard
- service: Standard
seller pcbemdev:
- city: Baton Rouge, Louisiana
- rating: 100.0%
- # reviews: 2043
offer pcbemdev:
- sold: 0
- started: February 3, 2026
- best offers: True
- availability: In Stock
- options: Ship-to-home
- quantity: 1
returns pcbemdev:
- method: Money back
- time: 30 Days
- policy: Returns Accepted
- paid by: Buyer
payments pcbemdev:
- other
- credit card: Mastercard
- wallet: Google-pay
general pcbemdev:
- condition: Used
- Electronic Components Semiconductors > Circuit Boards Prototyping > Printed Circuit Boards PCBs
Barco 13EK580158307 Is Similar To:
- Barco Cn607628 Pcb Circuit Main Power Input Board Part (37% similar) Inventory id: WH2-Z2-BLACK rack board box 10, 020326, bar. Comes as pictured. Regardless of the origin equipment, documentation provided or identification appearing upon equipment described and offered here is in no way certified for, recommended for any specific use. 1841 w carriage house Dr, baton...(February 3rd, 2026)
- Barco 13gk580155004 Panel Interface Timing Controller Pcb Circuit Board Part 13 Gk5801550 04 (60.2% similar) Shipping handling. We acquired the unit in a state surplus sale. 1841 w carriage house Dr, baton rouge, la 70815. Comes as pictured. Regardless of the origin equipment, documentation provided or identification appearing upon equipment described and offered here is in no way certified for, ...(February 3rd, 2026)
