COMSTAR 8002-6400D Circuit Board

( Brand: Comstar ), ( Manufacturer Part Number: 8002-6400D ), ( Part Type: Circuit Board ), ( Ideal Reference Number: 42559 )

Review COMSTAR Circuit Board

The **Comstar 8002-6400D** is a high-performance, industrial-grade circuit board designed for demanding applications in telecommunications, data acquisition, and embedded systems. Engineered with precision and built to endure harsh environmental conditions, this board features a robust **640-pin ZIF (Zero Insertion Force) connector interface**, ensuring seamless integration with a wide range of peripheral components while minimizing mechanical stress during assembly and disassembly. Its compact yet versatile design makes it ideal for space-constrained systems where reliability and efficiency are paramount.

At the core of the **8002-6400D** lies a sophisticated **FPGA (Field-Programmable Gate Array) architecture**, optimized for real-time signal processing, digital logic operations, and high-speed data handling. The board supports advanced **DSP (Digital Signal Processing)** capabilities, enabling complex computations such as filtering, modulation, and encryption with minimal latency. Its programmable logic allows for customizable configurations, making it adaptable to evolving industry standards and specific application requirements, whether for wireless communication, radar systems, or industrial automation.

Constructed with **high-reliability components**, including low-power CMOS logic, high-speed serial transceivers, and temperature-stabilized memory modules, the **8002-6400D** ensures consistent performance across a broad operational temperature range, typically from **-40 C to 85 C**. The board incorporates **ECC (Error-Correcting Code) memory** to safeguard against data corruption, while its **clock distribution network** delivers ultra-low jitter signals, critical for high-frequency applications like RF synthesis and timing-sensitive protocols. Additionally, the inclusion of **debugging and monitoring interfaces**, such as JTAG and UART ports, facilitates seamless firmware development, troubleshooting, and system diagnostics.

For enhanced connectivity, the **8002-6400D** integrates multiple **high-speed serial interfaces**, including **PCIe (Peripheral Component Interconnect Express)**, **LVDS (Low Voltage Differential Signaling)**, and **Gigabit Ethernet**, enabling rapid data transfer and compatibility with modern storage and networking solutions. Its **power management system** is optimized for efficiency, supporting a wide input voltage range while minimizing heat dissipation through advanced thermal dissipation techniques, such as embedded heat sinks or via-hole thermal vias. The board s **shielded design** further reduces electromagnetic interference (EMI), ensuring compliance with stringent regulatory standards like **FCC, CE, and ATEX** where applicable.

Beyond its technical specifications, the **Comstar 8002-6400D** is built with **long-term availability and modular scalability** in mind. Its **backward-compatible design** allows for incremental upgrades without requiring a complete system overhaul, while its **open-architecture approach** encourages third-party integration with additional co-processors, memory expansions, or custom I/O modules. Whether deployed in **military-grade communications, aerospace avionics, or industrial IoT infrastructure**, this circuit board delivers a blend of flexibility, durability, and high-performance computing making it a cornerstone for next-generation embedded solutions.

### **Pros and Cons of buying a Comstar 8002-6400D Circuit Board**

#### **Pros**

1. **Compatibility with Popular Routers** The Comstar 8002-6400D is widely used in consumer-grade routers, particularly those from brands like TP-Link, Netgear, and others that use the **Qualcomm Atheros AR9344** chipset. This makes it a cost-effective upgrade for routers that have failed or are outdated.

2. **High Performance for Basic Use** The board supports **Dual-Band Wi-Fi (2.4GHz and 5GHz)**, Gigabit Ethernet, and multiple USB ports, making it suitable for home and small office networks where high-end performance isn t required.

3. **Affordable Alternative to New Routers** Purchasing a replacement board is often cheaper than buying a new router, especially if the existing chassis is still functional.

4. **Easy to Install** Many users report that replacing the board is a straightforward process, especially if the original router s case is still intact and the wiring is well-documented.

5. **Community Support & Availability** Due to its popularity, spare parts and troubleshooting guides are widely available online, including forums like Reddit, eBay, and specialized router repair communities.

6. **Supports Multiple Firmware Options** Some users flash alternative firmware (like **DD-WRT or OpenWRT**) on compatible boards, extending functionality beyond stock firmware.

7. **Good for DIY Enthusiasts** If you enjoy tinkering with hardware, this board offers a manageable project for upgrading an older router.

---

#### **Cons**

1. **Limited Longevity & Wear** Like any electronic component, the board may degrade over time, especially if the original router was exposed to heat or power fluctuations. A used board may have reduced lifespan.

2. **Potential for Counterfeit or Damaged Units** Buying from unverified sellers (especially on eBay or AliExpress) risks receiving a **fake, damaged, or incompatible** board. Always check seller ratings and return policies.

3. **No Warranty or Return Options** Since this is a used/refurbished part, most sellers offer no warranty, meaning you bear the risk if the board fails shortly after purchase.

4. **Incompatibility with Some Routers** While many routers use this board, some models may require **additional components (e.g., antennas, power supplies)** that aren t always included in the sale.

5. **No Official Support** Unlike buying a new router from a manufacturer, you won t have access to customer service or firmware updates directly from Comstar or the router brand.

6. **Risk of Voiding Warranty** If the original router was under warranty, replacing the board may void it, leaving you without support if other components fail.

7. **Limited Future-Proofing** Newer Wi-Fi standards (like **Wi-Fi 6/6E**) are not supported by this board, making it less ideal for future-proofing a network.

8. **Potential for Bricked Firmware** If flashing custom firmware fails, the board may become unusable, requiring a full reset or replacement.

---

### **Conclusion**

The **Comstar 8002-6400D** is a **cost-effective, functional upgrade** for routers that rely on the **AR9344 chipset**, particularly for users who need a **basic to mid-range wireless performance** without investing in a new device. It is best suited for:

- **Home users** looking to revive an older router.

- **DIY enthusiasts** comfortable with hardware modifications.

- **Budget-conscious buyers** who prioritize affordability over cutting-edge features.

- **High-end performance** (e.g., Wi-Fi 6, multi-Gig Ethernet).

- **Long-term reliability** without maintenance.

- **Official support or warranties**.

If you decide to purchase one, **buy from reputable sellers**, verify compatibility with your router model, and consider **backing up firmware** before installation.

### **Recommendation**

- **Buy it if:** You have a compatible router, need a quick fix, and are willing to handle potential risks.

- **Avoid it if:** You want a **long-term, high-performance solution** or prefer official support.

- **Buy a new budget router** (e.g., TP-Link Archer C60 or Netgear Nighthawk R6700) if the cost difference is minimal.

- **Check for refurbished routers** with warranties from trusted sellers.

- **Consider a more modern board** (e.g., **Qualcomm Atheros QCA9563** for Wi-Fi 5 or **MediaTek MT7622** for Wi-Fi 6) if upgrading to a newer standard.

Ultimately, weigh the **cost savings against the risks** if you re confident in your ability to troubleshoot, the Comstar board can be a worthwhile purchase. Otherwise, a new router may offer better peace of mind.

Details:

Whether for testing, development, or production, the COMSTAR Circuit Board 8002-6400D offers a solid foundation your electronic projects. The COMSTAR Circuit Board 8002-6400D is a high-quality printed circuit board designed for electronic components and semiconductors.

part #: 80026400d price

• $194.99

specifications pcbemdev:

• brand: Comstar
• mpn: 8002-6400d
• part type: Circuit Board
• ideal reference number: 42559

seller pcbemdev:

• city: Champaign, Illinois
• rating: 98.9%
• # reviews: 1656

general pcbemdev:

• condition: Used
• Electronic Components Semiconductors > Circuit Boards Prototyping > Printed Circuit Boards PCBs

offer pcbemdev:

• availability: In Stock
• sold: 0
• options: Ship-to-home
• quantity: 1
• best offers: True
• started: May 21, 2026

shipping pcbemdev:

• cost: $0.00
• carrier: USPS
• class: Standard
• type: Fixed
• transit: 6-9 Days
• service: USPS Ground Advantage

payments pcbemdev:

• other
• credit card: Diners-club
• wallet: Google-pay

returns pcbemdev:

• policy: Returns Accepted
• method: Money back
• time: 60 Days
• paid by: Buyer

Comstar 8002-6400D Is Similar To:

• Comstar 8004-7300c Circuit Board (87.5% similar) The Comstar circuit board 8004-7300C ensures precision, efficiency, and performance in electronic systems. The Comstar circuit board 8004-7300C is a high-quality printed circuit board designed and manufactured by in the USA. It is a reliable electronic component suitable for various industrial and ...(May 20th, 2026)
• Comstar 8002-6400b Circuit Board (96.9% similar) It serves as a crucial component in the industrial and business sectors for prototyping circuit board assembly. This specific model is ideal for reference number 42559 and designed electronic components semiconductors in various electrical equipment supplies...(May 20th, 2026)
• Comstar 8003-5800b Circuit Board (87.5% similar) The Comstar circuit board 8003-5800B is a printed circuit board designed for electronic components and semiconductors. The high-quality construction and functionality of this circuit board make it a reliable choice for various electronic projects systems requiring precise efficient circuitry optimal...(May 21st, 2026)