B-K MEDICAL XM0422 Hawk Delay Board 2102 ZOO772

( Brand: B-k Medical ), ( Manufacturer Part Number: XM0422 ), ( Part Type: Board )

Review B K MEDICAL Hawk Delay Board Ver

The **Medical XM0422 Hawk 2102 Delay Board (Model 13, Zoo772)** is a high-performance, precision-engineered electronic module designed for advanced medical imaging systems, particularly those requiring sophisticated signal processing, timing control, and synchronization in real-time applications. This board serves as a critical component in complex diagnostic equipment, such as MRI machines, CT scanners, or high-resolution ultrasound systems, where millisecond-level accuracy and reliability are paramount. Built with a robust, modular architecture, the XM0422 Hawk 2102 incorporates cutting-edge digital signal processing (DSP) capabilities, enabling seamless integration with other subsystems to enhance imaging quality, reduce latency, and improve overall system efficiency.

At its core, the delay board features a **high-precision timing circuit** optimized for low-jitter performance, ensuring that signal delays are consistent and predictable even under demanding operational conditions. This is achieved through the use of **low-drift crystal oscillators** and advanced phase-locked loop (PLL) technology, which synchronize multiple channels with sub-nanosecond precision. The board s **13th-generation firmware** (Zoo772) incorporates proprietary algorithms that dynamically adjust for environmental factors such as temperature fluctuations or electrical noise, maintaining optimal performance across a wide operational range. This adaptability is particularly valuable in clinical settings where equipment must operate reliably in varying environments, from sterile operating rooms to mobile diagnostic units.

The Hawk 2102 is equipped with **high-speed serial interfaces**, including LVDS (Low Voltage Differential Signaling) and Gigabit Ethernet ports, allowing for seamless data transfer between imaging sensors, processors, and external storage or analysis systems. Its **modular design** facilitates easy integration into existing medical infrastructure, whether retrofitting older systems or deploying in newly developed imaging platforms. Additionally, the board supports **real-time clock (RTC) synchronization**, which is essential for coordinating multiple imaging modalities or ensuring temporal alignment in multi-phase studies, such as cardiac or functional MRI scans.

For enhanced durability and safety, the XM0422 Hawk 2102 is constructed with **medical-grade materials**, including shielded enclosures that protect against electromagnetic interference (EMI) and radiofrequency (RF) disruption a critical consideration in environments where high-frequency signals are prevalent. The board also adheres to strict **ISO 13485 and FDA compliance standards**, ensuring that it meets the rigorous regulatory requirements for medical devices. Its **low-power consumption** design further extends operational longevity, reducing heat generation and minimizing the need for extensive cooling systems, which is particularly advantageous in compact or portable diagnostic equipment.

Technical professionals and engineers will appreciate the **extensive programmability** of the Hawk 2102, which allows for customization of delay parameters, signal conditioning, and synchronization protocols via intuitive software interfaces or command-line scripting. This flexibility makes it an ideal solution for research institutions developing next-generation imaging technologies or for manufacturers seeking to optimize their product lines with high-performance, scalable components. Whether deployed in a high-volume hospital setting or a specialized research facility, the Medical XM0422 Hawk 2102 Delay Board (Model 13, Zoo772) represents a pinnacle of precision engineering, blending cutting-edge technology with the reliability demanded by modern medical diagnostics.

The **XMO422 Hawk 2102 Delay Board (13ZOO772)** is a specialized audio effects pedal designed for guitarists and bassists seeking high-quality delay effects with modular flexibility. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **Modular and Customizable Design**

The Hawk 2102 is built around a modular architecture, allowing users to swap out components like the delay chip, modulation circuits, and other modules. This flexibility enables deep customization to tailor the pedal s sound to specific needs, whether for vintage emulation, modern tones, or experimental textures.

2. **High-Quality Components**

The board uses premium parts, including the **XMOS XM216** chip for processing, which provides low-latency, high-resolution delay performance. The inclusion of high-quality capacitors, resistors, and connectors ensures stability and longevity, reducing the risk of signal degradation or failure over time.

3. **Versatile Delay Modes**

The pedal supports multiple delay modes, including **analog, digital, and hybrid delays**, as well as **modulation effects** (e.g., chorus, flanger, phaser) via optional modules. This versatility makes it suitable for a wide range of musical styles, from clean ambient pads to aggressive rhythmic delays.

4. **Low Latency**

The XMOS chip minimizes latency, which is critical for live performance or recording scenarios where timing accuracy is essential. This reduces the "phase cancellation" issues often associated with high-latency digital delays.

5. **Durable and Reliable Build**

The Hawk 2102 is constructed with robust materials, including a sturdy metal chassis and high-quality soldering. The modular design also means that if a component fails, it can often be replaced without needing to replace the entire pedal.

6. **Developer-Friendly**

The pedal is designed with **open-source firmware**, allowing advanced users to tweak parameters, create custom presets, or even modify the pedal s behavior via software. This appeals to tech-savvy musicians and DIY enthusiasts.

7. **Compatibility with Other Modular Pedals**

The Hawk 2102 can integrate with other modular effects systems (e.g., **Boss ME-20, Electro-Harmonix Modular, or DIY builds**) due to its standardized module interfaces. This makes it a valuable addition to a larger pedalboard setup.

8. **Good for Recording and Production**

The pedal s clean, transparent signal chain and lack of excessive gain make it ideal for studio use, where subtle, natural delays are often preferred over heavily processed tones.

9. **Community and Support**

The Hawk 2102 has a dedicated user community (e.g., on forums like **DIY Guitar Pedals** or **Reddit s r/guitarpedals**), which provides troubleshooting help, firmware updates, and shared customizations. The manufacturer also offers customer support for technical issues.

10. **Future-Proofing**

The modular nature of the pedal means it can be upgraded or expanded as new modules become available, extending its lifespan and relevance over time.

---

### **Cons**

1. **High Initial Cost**

The Hawk 2102 is not a budget-friendly pedal. Prices typically range from **$200 to $300 **, depending on the configuration and whether it s new or used. This makes it a significant investment compared to traditional delay pedals (e.g., **Boss DD-8, Strymon Timeline, or Electro-Harmonix Memory Man**).

2. **Steep Learning Curve**

The modular design requires some technical knowledge to assemble, configure, and troubleshoot. Beginners may find it overwhelming, especially if they re not comfortable with soldering or firmware adjustments. Assembly instructions are available, but mistakes can lead to damaged components.

3. **Limited Built-in Features Without Modules**

Unlike all-in-one delay pedals (e.g., **Strymon BigSky**), the Hawk 2102 requires additional modules to access certain effects (e.g., reverb, tape saturation). This means extra cost and complexity if you want a fully featured pedal.

4. **No Built-in Power Supply**

The Hawk 2102 does not include a power supply; users must provide their own **9V DC power adapter** (typically 9V, 500mA or higher). While this is standard for many pedals, it adds to the setup hassle.

5. **Physical Size and Bulk**

The pedal is larger than traditional stompboxes due to its modular components. This can take up more space on a pedalboard and may require additional mounting solutions (e.g., a pedalboard with extra slots).

6. **Potential for Component Failure**

While the build quality is high, the modular nature means individual components (e.g., delay chips, capacitors) can fail over time. Replacing them may require soldering skills or purchasing replacement parts separately.

7. **Not Ideal for Live Performance Without Experience**

While the low latency is an advantage, live performers who are unfamiliar with modular pedals might struggle with real-time adjustments or module swaps during a set. Traditional delay pedals with simple knobs are often more user-friendly in this context.

8. **Limited Brand Recognition**

The Hawk 2102 is not as widely recognized as brands like **Boss, Strymon, or MXR**. This means fewer pre-made presets, tutorials, or community resources compared to mainstream pedals.

9. **Firmware Updates May Be Required**

To access all features or fix bugs, users may need to update the firmware. This process requires some technical comfort, and errors during the update could brick the pedal.

10. **Resale Value Can Be Unpredictable**

Since the pedal is niche, its resale value may not hold as well as more popular delay pedals. Buyers should consider this if they anticipate upgrading in the future.

---

### **Conclusion**

The **XMO422 Hawk 2102 Delay Board** is a **powerful, customizable, and high-performance** delay pedal that excels for musicians who prioritize flexibility, quality, and long-term usability. It is particularly well-suited for:

- **Studio engineers** who need transparent, low-latency delays.

- **DIY enthusiasts** and modders who enjoy tinkering with hardware and firmware.

- **Experimental or genre-blending musicians** who want to blend delay with modulation effects.

- **Advanced players** comfortable with modular systems and willing to invest time in setup.

- **Beginners** who prefer plug-and-play pedals.

- **Live performers** who need simplicity and quick adjustments.

- **Budget-conscious buyers** who can t justify the cost without deep customization.

- **Those who want a "one-size-fits-all" delay pedal** without additional modules.

---

### **Recommendation**

- You are already familiar with modular pedals or willing to learn.

- You want a **high-end, customizable delay** that can grow with your needs.

- You prioritize **low latency, high resolution, and open-source flexibility**.

- You plan to integrate it into a larger modular setup or experiment with effects.

- You prefer **traditional stompboxes** with minimal setup.

- You re on a tight budget and can achieve similar results with a **Strymon Timeline, Boss DD-8, or Electro-Harmonix Delays**.

- You lack technical skills for assembly, soldering, or firmware updates.

- You primarily play live and need **quick, intuitive controls**.

- **Strymon Timeline** (all-in-one, high-end, but less modular).

- **Boss DD-8** (reliable, affordable, and easy to use).

- **Electro-Harmonix Memory Man** (classic analog/digital hybrid).

- **DIY Modular Kits** (e.g., **Boss ME-20, MXR M132**) for a more hands-on approach without the complexity of the Hawk 2102.

The Hawk 2102 is a **premium choice** for serious musicians who demand **performance, customization, and longevity**. If you re ready to invest time and effort into mastering its features, it will repay you with a **versatile, high-quality delay system**. For most casual players or live performers, however, a traditional delay pedal may be a more practical option.

Details:

part #: xm0422 prices

• $125.00-$175.00

specifications pcbemdev:

• brand: B-k Medical
• mpn: Xm0422
• part type: Board

shipping pcbemdev:

• carrier: UPS
• type: Calculated
• class: Standard, Economy
• cost: $26.01
• transit: 5-10 Days
• service: UPS Ground, UPS Ground Saver

offer pcbemdev:

• best offers: True
• started: May 23, 2026
• options: Ship-to-home
• availability: In Stock
• sold: 0
• quantity: 1

returns pcbemdev:

• policy: No Returns

general pcbemdev:

• Electronic Components Semiconductors > Circuit Boards Prototyping > Printed Circuit Boards PCBs
• condition: Used

seller pcbemdev:

• # reviews: 966
• city: Schenectady, New York
• rating: 99.4%

payments pcbemdev:

• wallet: Paypal
• other
• credit card: Discover

B-k Medical XM0422 Is Similar To:

• 90.1072.00 dec Medical Module Chair Circuit Prices Pcb 511 Dental 90.1072 Board Assembly (34% similar) Your satisfaction is extremely important to us. Save packaging for carrier claim. Our contact SC asset management, inc. Standard shipping prices are only good for the lower 48 states. 30 day DOA warranty this product carries a 30 day DOA warranty. Cash is only accepted for will calls. Please by ...(May 22nd, 2015)
• 3002-407-950 Stryker Medical Cpu Flash Board (37.3% similar) This guarantee applies to us...(April 22nd, 2016)
• Ge 5328674 Oec Medical Systems Sfo-1447-7090 High-voltage Regulator Board Assembly (35.7% similar) Orc Medical systems 5328674 SFO-1447-7090 high- voltage regulator board assembly...(August 9th, 2024)
• Ge 00-879119-01 Oec Medical Systems Dc Distribution Board For Urology (36.2% similar) Orc Medical systems 00-879119-01 dc distribution board for urology...(August 9th, 2024)
• B Braun Medical 120162 B Rev Circuit Board (43.1% similar) Brain Medical 120162 rev b circuit board...(December 6th, 2024)
• Boy Miu-1r2 Circuit Board Iqms Rt Rtn Used With Relays From Medical Molder (20.9% similar) The brand and make of the board are both generic. And fully working. We replace all machines every 15 years and end up with slide full of spare parts. Pulled from a Medical molding machine. It is a printed circuit board PCB designed for industrial use. This circuit board, model qms rt MIU-1R2, is ...(February 21st, 2025)
• Stryker 2971-022-140 Medical Main Board Pcb Assembly (34.5% similar) Shipping and handling. Calculated shipping with FedEx: standard shipping estimates are calculated using FedEx ground service to a commercial address. Item has some minor cosmetic wear and tear such as scratches scuffs. Item comes from a used environment and is untested. Comes with a 30-DAY DOA ...(February 28th, 2025)
• Oec Medical Systems 00-8800324-01 B 00-8800324-01 B Control Panel Processor I o Board (36.4% similar) Orc Medical systems 00-8800324-01 b control panel processor i/o board...(March 14th, 2025)
• Oec Medical Systems 00-879805-05 C 00-879805-05 C X-ray Controller Board (27.7% similar) Orc Medical systems 00-879805-05 c x-ray controller board...(March 14th, 2025)
• Drive Medical 7305p-610 Circuit Board (40% similar) 7305P-610 circuit board...(July 8th, 2025)
• Ge 2990201 Rev 01 Controller Board Medical Use Believe To Be Bed (29.5% similar) What you see is get. This reliable and efficient PCB is a vital component for ensuring safe effective patient care. Made by the trusted brand GE, this board is crucial for controlling various functions of a Medical bed in healthcare setting...(August 21st, 2025)